[s-cars] Time to part out my audi or sell it for parts, any interest?

[Trevor Frank]

Hey guy's I am parting out my car, not really interested, yet, to sell
the little stuff, but all of the custom bit's first.  I know that I had
contact with a few of you in the past about it.  Here is a basic run
down of what I want to get out first, if not just the whole car some
parts have already been taken so the remaining for 10k.  I will be
posting it on audifans and eventually ebay but wanted to give the list
the first crack.

Intercooler set up, with bumper, 12x24x3.5 wiggens fittings. 2k

Front suspension, struts cut 1" and double adjustable koni's in it with
only
about 5k on them, with 400lb 10 in springs, and adjustable spring
perches $1k.

Custom intake set up, carbon airbox, Javad used this to make the one he
is selling.  With Reprogrammed hot plate maf, no wire to rip, 4"inlet
102mm 3.5"outlet 90mm, includes a 2 bennet hose to the turbo.  Comes
with Maf reprogrammer. 1k

Custom Innovative BB turbo, less than 5k on it. $800

Custom seat mounting Brakets, used to mount my cobra seats.  Lowers the
drivers seat 1.5in and the passenger about 2in. $400

Big Black front brake set up, with Porterfield 97 compound pads and
993tt rotors, less than 5k on rotors, also another set of rotors still
with some life on them.  $800

Custom Dash/ashtray replacement.  Has a hand made 8 channel K type tc
reader that I used to display intake temp, exhaust temp before and after
the turbo, also will display any voltage between 0 to 10 volts.  Shows
temps in deg C.  Also has a nitrous oxide guage on it, but could be
replaced with another guage of similar size. $200

Carbon interior. $400 

Engine block and good 7a cylinder head.  Reground 7a intake and exhaust
cams, and distributor.  Custom Mihnea programming provided as well.
Decompressed stock pistons, adjustable cam timing pully. Forged Rods, 1
hole has about 40% leak down and the cylinder head has been flowed but I
believe it is cracked so that is why the 7a head is provided. 1k

RS2 exhaust manifold, $200

75lb injectors, $400

Custom fuel rail with pressure guage on it, and adjustable fuel pressure
reglator, all steel braded lines, $200

Custom oil and water lines to and from turbo, $200

Pictures at http://www.frankracing.com/audi.html

Other pictures can be provided.

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. or any of its affiliates or
subsidiaries that may be confidential, proprietary, copyrighted,
privileged and/or protected work product, and is meant solely for
the intended recipient. If you are not the intended recipient, and
have received this message in error, please contact the sender
immediately, permanently delete the original and any copies of this
email and any attachments thereto.