[s-cars] Camber 93 S4

[Scott Sierakowski]

Link to the plate mod:  http://www.elektro.com/~audi/alignment/

Good Luck,

-Scott




On 5/15/07, Sam Clarkson <sam at edgetoedge.co.nz> wrote:
> Hi
> Having now pulled apart my suspension legs and about to fit eibach's
> I know there will be camber issues. I see that there is room for a
> bit more 'adjustment' within the existing setup. The stock camber
> plate's slots could be ground out a further 3mm before the centre bit
> hits the side. Further the towers themselves could in theory be
> slotted out by about 3mm. I've just gained a 'free' 6mm or am I being
> reckless here? The plates have 10mm of adjustment standard so turning
> 10mm into 16mm is tempting.
> I remember in the dim recesses of my mind (damn there's some rats in
> that attic!) reading an article about DIY camber plates/adjustment
> but I can't seem to search it up on the net? Anyone point me in the
> right direction?
>
>
> Sam Clarkson
> Edge to Edge
> P.O. Box 27
> National Park 3948
> Ph 0800 800 SKI (754)
> http://www.edgetoedge.co.nz
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>