[s-cars] the GB CPS how too install?
Vincent Frégeac
s.sikss at gmail.com
Mon May 21 19:50:23 EDT 2007
Dave,
The original CPS was looking like a CYHME56, but grey, while the new one was
like a CYHME301. Looking at the pictures on the BB Automacao website, it
seems that the two pins left on the bracket when I pried out the CPS were
part of the CPS, not part of the bracket. So, apparently, the solution to
drill out then use the 301 rivets seems to be the good one.
On a side note, the S-Bitch still doesn't start when hot so the problem is
probably somewhere else. I don't know why I'm not that surprised :(
Vincent
-----Message d'origine-----
De : s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] De la part de Dave Forgie
Envoyé : 21 mai 2007 15:40
À : s-car-list at audifans.com
Objet : [s-cars] the GB CPS how too install?
Vincent: Thanks for the effort of doing that write up. However, I
really am confused about your original CPS. My original CPS had rivets
holding the sensor to the bracket, not glue. The solution to add the BB
Automacao CYHME301:
http://www.bbautomacao.com/home_hall_effect_vane_sensors.html
is to drill out the OE rivet heads and add the BB Automacao sensor,
using something like a house door hinge pin to flatten out the BB
Automacao rivets. That, and splicing the wires, color to color, is the
end of that step. No glue or epoxy needed.
Dave F.
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/813 - Release Date: 20/05/07
07:54
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/813 - Release Date: 20/05/07
07:54
More information about the S-CAR-List
mailing list