[s-cars] Thermostat and O-Ring

[djdawson2 at aol.com]

Thermostat goes in first... gasket on top... then gooseneck.? 100% for sure... no doubts.



Dave


-----Original Message-----
From: Douglas Fifield <douglas.fifield at gmail.com>
To: S List <s-car-list at audifans.com>
Sent: Thu, 15 Nov 2007 8:11 pm
Subject: [s-cars] Thermostat and O-Ring




Hedz,

Continuing on in my engine guts project, I come to the thermostat
replacement.  My question is, does the O-ring go between the stat and
the block, or the stat and the plastic gooseneck attached to the water
hose?

Both the Bentley and the Family Album show the o-ring on the topside
(gooseneck) of the stat.  However, the one I removed had the o-ring on
the underside.

I managed to hose this up further by breaking the gooseneck upon
tightening it down after putting in the new stat (with ring on
underside).  Sigh, another part on order from the stealer.

What's the consensus?

-- 
Douglas in MN
95.5 Audi S//6 Avant
73 BMW R60/5 mit Toaster Tank
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list


________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com