[s-cars] 034 Motorsports coil conversion harness

[Odyrestorations at aol.com]

Thanks to all for the advice re the cover. Avoiding heat is a good thing, I  
will leave the OEM cover alone. I'll install new plugs (old ones have  run 
50K), make sure the boots fit properly onto the plugs and report back. 
 
Tom Rasmussen
 
 
In a message dated 11/26/2007 10:57:50 A.M. Central Standard Time,  
mike at urq20v.com writes:

Before doing the conversion, make sure your plugs are fresh.
A questionable plug will have a similar symptom as a flaky coil and can  lead 
to coil failure.
BTDT.
 
Also, installing the cover will increase the coil temperature, probably  
something you want to avoid.

Mike

_www.urq20v.com_ (http://www.urq20v.com/) 




-------- Original Message --------
Subject: Re: [s-cars] 034  Motorsports coil conversion harness
From:  Odyrestorations at aol.com
Date: Mon, November 26, 2007 10:13 am
To:  davekase at pdqlocks.com
Cc: s-car-list at audifans.com


What I meant  was - will the old cover, with old coils removed, fit on with 
the new  coil/harness set? My goal is to run the original cover so all looks  
stock. 

tom


In a message dated 11/26/2007 9:01:37 A.M.  Central Standard Time, 
_davekase at pdqlocks.com_ (mip://00f83a20/default.html#Compose)   writes:

The Apikol cover does not work with the old coils. There is  no where to 
bolt them.


David Kase



_Odyrestorations at aol.com_ (mip://00f83a20/default.html#Compose)   wrote:
> Dave -
> 
> I like that cover, and the price is  right. I'll try one.
> 
> Does anyone know if the old cover will  fit with the old coils pulled 
> out? I don't want to try it until I  know my new system is 100% as I 
> might need to put the old ones back  on...
> 
> 
>  Tom













**************************************Check out AOL's list of 2007's hottest 
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)