[s-cars] How to remove turbo?

Theodore Chen tedebearp at yahoo.com
Sat Oct 6 00:17:15 PDT 2007


it's much easier if you remove the wastegate and the corrugated exhaust pipe.  those are pretty easy to remove - only 8 nuts total and they're all pretty easy to reach.  once that's done, you'll have more room to get at the nuts on the turbo.  i didn't have much trouble getting the turbo off.

that reminds me - i still have the stock k24 turbo sitting around.  what should i do with it?

----- Original Message ----
From: Trevor rice <trevorricetemp at hotmail.com>
To: s-car-list at audifans.com
Sent: Thursday, October 4, 2007 11:32:37 AM
Subject: [s-cars] How to remove turbo?

Trying to remove turbo without removing exhaust manifold, wastegate or downpipes.  Have gotten three of four hot side inlet to manifold bolts off & three of four hot side exhaust side bolts off.

The remaining two bolts are being a PITA.  Anyone got any hot tips on removal procedures?
Hot side inlet to manifold is top left bolt, its a 15mm bolt but a regular spanner nor socket can fit in their.  Have tried a slimmed down open end wrench but its getting hung up.
Hot side exhaust to downpipe is bottom right bolt 14mm, seems theirs a recess in the downpipe to facilitate a socket but i haven't had success getting a socket & knuckle into the small space.

If & when I get theses suckers off I'll keep you all posted on how to strip & rebuild a k24 turbo.  Might even throw on some k26 parts just for fun.

Thanks
Trev.

_________________________________________________________________
Windows Live Hotmail and Microsoft Office Outlook – together at last.  Get it now.
http://office.microsoft.com/en-us/outlook/HA102225181033.aspx?pid=CL100626971033
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list





More information about the S-CAR-List mailing list