[s-cars] BB Upgrade - rotor question

[Mike Fitton]

30 is the width of the friction surface in millimetres.  I'm not sure 
what to make of your caliper being too small.  Maybe suggest a test fit 
just to see what's up.  As for the calipers...they're from a 92-95 
928GTS?  I'm not sure what the older S4 and stuff had for brakes.

I'm using plain rotors and no problems stopping my car.  I think it's 
more about the pad for general purposes.  <insert usual shameless Ferodo 
plug here>

-Cheers!
Mike

Tony Curran wrote:
> Hi folks, I'm accumulating the parts for a spring upgrade to Big Blacks.
> Just received a used pair of 993 calipers and was doing a bit of cleaning
> when it occurred to me the space for the rotor didn't quite appear to be
> 30mm wide - measures just a tad over 28mm.
>  
> So, when the dimension of the A8 rotor 4D0 615 301 J is spec'd as 323x30,
> just exactly what is the 30?
>  
> I'm planning on using plain A8 rotors (no slots or holes & $95) any thoughts
> on pros/cons? (I don't plan to track car).
>  
> Thanks
>  
> Tony
> 96 S6
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>   

________________________________________________________________________
Delivered using the Free Personal Edition of Mailtraq (www.mailtraq.com)