[s-cars] PS hose needed

[AaronT]

Thanks everyone for the tips.
What a great group!
Happy holidays
Aaron

On Tue, Dec 16, 2008 at 10:29 AM, Joshua van Tol <josh at spiny.com> wrote:

> Another trick to keep the crush washers in place is to use a rubber band or
> twist tie to kind of loosely hold the hose + banjo + washer assembly
> together. Then, once the banjo is started, remove the band or tie. In the
> case of a rubber band, simply break it.
>
>
> On Dec 16, 2008, at 2:42 AM, Theodore Chen wrote:
>
> this is probably a good time to mention that the trickiest part of the job
>> is installing the banjo at the steering rack, with crush washers on both
>> sides of the banjo, and getting the banjo bolt threaded, without dropping
>> anything.  you have to do it one-handed because there's not much room, and
>> it'd be a real pain to look for a crush washer if you dropped it back there.
>>  the crush washers aren't that expensive, so you may want to have one or two
>> extras in case you do drop one.
>>
>> i used permatex gasket adhesive to stick the crush washers to the banjo,
>> and didn't have too much trouble getting the bolt threaded.
>>
>>
>>
>>