[s-cars] O2 sensor replacement

[Tom Green]

You mean something that is not in this FAQ list, Floyd, since I know  
you have
this FAQ as a reference already?  :-)

Yes, there is, actually.  That 13913 splice in sensor number comes  
from the
12v web site for the V6 Audis. Some of the online suppliers even include
butt splices in the box, although you want to use the smallest  
splices you
can (18-22ga) and shrink wrap the staggered splices so you can reuse the
original heat protection.  You can use uninsulated butt connectors since
you are shrink wrapping them, making them as small as possible.

The Bosch 13019 in addition to the Bosch 13957 are direct plug in for  
the
URS4/6.  Leave the plastic cap on until you have it in place to  
install.  No,
don't even take it off to look at it, and make sure you don't get  
anything on
it when installing.

My spliced sensor didn't last as long as the OEM.  Maybe I am just not a
good splicer.

Tom

> Date: Sat, 19 Jan 2008 18:54:33 -0800 (PST)
> From: chris chambers <fastscirocco_2000 at yahoo.com>
> Subject: Re: [s-cars] O2 sensor replacement
> To: Floyd Noel <floyd.noel at gmail.com>, Scar <s-car-list at audifans.com>
> Message-ID: <867201.32201.qm at web60522.mail.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Floyd,
>
> the info you want is here:
>
> http://forums.audiworld.com/s4s6/msgs/176059.phtml
>
> HTH
> Chris
>
>
> --- Floyd Noel <floyd.noel at gmail.com> wrote:
>
>> Finally ready to replace my old O2 sensor and I was just wondering if
>>
>> there was anything special I should know about. TIA
>>
>> R/S
>> Floyd Noel
>> Sgt/USMC