[s-cars] individual fused coils
Paul Gailus
gailus at mindspring.com
Mon Mar 17 17:39:29 PDT 2008
Brian,
I'd recommend using 5 amp individual fuses, although you could probably go as low as 3 amps and still be OK.
The rating of this downstream fuse must be small enough that a short will blow this fuse but leave the existing 15A upstream fuse fully intact. This will depend on the "selectivity ratio" of the particular fuses that are used, but a 5A fuse should provide enough margin.
The other more obvious constraint is that the 5 individual fuses each need to be at least 3A to support the same total average current as the existing 15A fuse.
-Paul
-----Original Message-----
>From: brian hoeft <qweblog at gmail.com>
>Sent: Mar 17, 2008 11:49 AM
>To: liSt <s-car-list at audifans.com>
>Subject: [s-cars] individual fused coils
>
>Hi list,
>
>After some personal debate I decided to purchase 5 OE coils for complete
>replacement and want to go with individual fuses for them.
>
>I know a few of you have done it from searching archives but I didnt find an
>amp rating mentioned. Hoping someone could chime in with that.
>
>Also, if anyone has pictures they could email, that would be a bonus. Even
>the smallest fuse holders im finding are going to grab my eye in the end,
>but I think its worth it.
>
>thanks, brian
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list