[s-cars] Rewiring OE Coil Packs

[Mark Turczyn]

Dave-

Nice write up-- interesting work bench with a vintage SD104 frequency sweep
generator (going from dim memory here--wonder where the matching SD105 is)
sitting there along with other vintage analysis equipment.  Wonder if this
was a shot of  Sean's home work bench.


On 11/18/08 12:37 AM, "David Forgie" <forgied at shaw.ca> wrote:

> For those, including Matt, that suspect a problem with their OE coils but yet
> the coils aren't yet
> oozing gobs of black goop like the one Sean D. shows here:
> 
> http://forums.audiworld.com/s4s6/msgs/224719.phtml
> 
> The problem might just be with the wiring cracking and shorting.  The solution
> is to run new wires
> as was shown here:
> 
> http://forums.audiworld.com/s4s6/msgs/243208.phtml
> 
> The three pin male pin housings that connect the coil power cables to the
> firewall connector rack are
>  PN 443 906 247 (if they break because of being brittle).
> 
> The three pin female pin housings that connect to the OE POSs (which have male
> pins in and out),
> are 443 906 233.  Reference Illustration 905-20 items 23 and 24.
> 
> HTH
> 
> Dave F.
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list