[s-cars] Still got sticky caliper
Matthew Russell
skippertgore at gmail.com
Tue Nov 18 12:49:18 PST 2008
Well then the price changed as of this morning.
The rears were on sale for 129.95 each side, making them only 30 bucks
more than the remans less then core.
-Matt
Sent from my iPhone
On Nov 18, 2008, at 11:08 AM, "Mike Sylvester" <mike at urq20v.com> wrote:
> Not really. The reman price has a $100 core included.
> So it is a $140 difference.
> And that's if you want the left side.
> The right is shown at $394.
>
> Mike
>
> www.urq20v.com
>
>> -------- Original Message --------
>> Subject: Re: [s-cars] Still got sticky caliper
>> From: Matthew Russell <skippertgore at gmail.com>
>> Date: Tue, November 18, 2008 8:43 am
>> To: s-car-list at audifans.com
>>
>>
>> Steve - I stumbled across this today, I can't say if it's the
>> answer... but it puts it within 30 bucks of a reman.
>>
>> http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=20v%20T&model=C4%20S4&submodel=Quattro&category=Braking
>> (about 1/2 way down the page)
>>
>> -Matt, CO
>> 92 s4
>>
>>
>>
>>
>> On Nov 17, 2008, at 9:44 PM, Tony wrote:
>>
>>> Message: 3
>>>
>>> This morning driving to work I experienced a dragging caliper that
>>> caused
>>> serious amounts of smoke. Reached in with screwdriver to let go the
>>> handbrake mech which moved about one eighth of an inch to free pads.
>>>
>>> Replaced caliper with remanufactured unit and cable four months ago.
>>> Replaced carrier one week ago. Performed caliper handbrake R&R on
>>> Friday.
>>> Parked car for the weekend.
>>>
>>> This morning rolled back and down the driveway with no apparent
>>> dragging of
>>> the pads. Drove off. About 1km in to drive to work sensed car wasn't
>>> pulling
>>> away as smoothly. Pulled in to parking lot to see driver side rear
>>> wheel
>>> smoking. Reached under the rear and flicked the handbrake mech which
>>> moved
>>> about one eighth of an inch and all is well again.
>>>
>>> In all of this I haven't used the handbrake at all.
>>>
>>> Help please caused I've exhausted all I know. Next step is to hand
>>> off to my
>>> local wrench to investigate and I'm leaning towards a new (non
>>> remanufactured) caliper.
>>>
>>> Thanks
>>>
>>> Tony
>>> 96 S6
>>
>> _______________________________________________
>> S-CAR-List mailing list
>> S-CAR-List at audifans.com
>> http://www.audifans.com/mailman/listinfo/s-car-list
>
More information about the S-CAR-List
mailing list