[s-cars] Fw: Bank1-Sensor1 Internal Resistance too High

[mike schowengerdt]

----- Forwarded Message ----
From: mike schowengerdt <urdrquattro at yahoo.com>
To: Keith Franchetti <skidfranc at gmail.com>
Sent: Tuesday, November 25, 2008 10:43:21 AM
Subject: Re: [s-cars] Bank1-Sensor1 Internal Resistance too High


did you say car was A6 2.7tt ?  if so, B1S1  oxs sensor is the front one on the passenger side, located at  the turbo outlet (just below the edge of the firewall)...the one under the car is S2 @the inlet of convertor #2

each side has two oxs sensors and two convertors....HTH




________________________________
From: Keith Franchetti <skidfranc at gmail.com>
To: s-car-list at audifans.com
Sent: Tuesday, November 25, 2008 10:24:51 AM
Subject: [s-cars] Bank1-Sensor1 Internal Resistance too High

A little more info.:  I see O2 sensors protruding from the front of each
cat.  Does anyone think it would be one of these?  Or is there an O2 sensor
earlier in the system?  If so, where?  Thanks!

Keith
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list