[s-cars] rear suspension swap question

[qshipq at aol.com]

 the 1990 200 uses the older 5ktq uprights, which are different than the 1991> 200tq/v8/S4/S6/100q.? That said, it has to do with the upper mounting perch.? You can use the uprights complete, otherwise, the shock diameter is larger on the later cars which could make this a PITA.

The short answer:? Yes, if the uprights are complete they will swap.

HTH

Scott J


 


 

-----Original Message-----
From: Mark Underwood <mark at underwoodgroup.com>
To: s-car-list at audifans.com
Sent: Tue, 14 Oct 2008 6:30 pm
Subject: [s-cars] rear suspension swap question










I may have located a set of "junk" rear shock/spring/perch assemblies, which
I need to be able to put on the parts car in order to maintain it as a
"roller" (the parts car has a rear coilover setup that I want to experiment
with - but I don't want to use the rear suspension parts on the project car)

 
here's the question - will a rear shock/spring/perch setup from a 1990 audi
200 work?
 
Thanks,
 
Mark Underwood
(919) 782-3024
 
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list