[s-cars] Brake Rotor for BBK

[Graham Hicks]

Hey Tony...Good question.
I believe the whole succession of part number thing would mean you'd have a hard time finding the A version.  But that's just my understanding.  The J suffix appears to be the current part and would be the part of choice if you got to choose, although I'm not sure what would be the "improvement" on a rotor to necessitate a part succession.



Graham Hicks
  UrS6Turbo at Yahoo.ca
  

--- On Thu, 10/16/08, Tony Curran <tony.curran at sympatico.ca> wrote:
From: Tony Curran <tony.curran at sympatico.ca>
Subject: RE: [s-cars] Brake Rotor for BBK
To: urs6turbo at yahoo.ca, s-car-list at audifans.com, manuelsanchez at starpower.net
Received: Thursday, October 16, 2008, 8:40 PM

With part number 4D0 615 301 A or J 

Tony
96 S6 - also planning the BBK mod!

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Graham Hicks
Sent: October 16, 2008 7:15 PM
To: s-car-list at audifans.com; manuelsanchez at starpower.net
Subject: Re: [s-cars] Brake Rotor for BBK


2000 A8 has the right offset.  That's what I'm using.

Graham Hicks
  UrS6Turbo at Yahoo.ca
  


--- On Thu, 10/16/08, manuelsanchez at starpower.net
<manuelsanchez at starpower.net> wrote:

> From: manuelsanchez at starpower.net <manuelsanchez at starpower.net>
> Subject: [s-cars] Brake Rotor for BBK
> To: s-car-list at audifans.com
> Received: Thursday, October 16, 2008, 5:35 PM
> Fellow S-Heads,
> 
> I need to find out which brake rotor matches to  the following BBK 
> system:
> 
> 1. Porsche 993TT Big Red Calipers
> 2. OEM Audi RS2 steel caliper brackets
> 
> I believe that the size is 323x30 but there seems to be
> some question regarding the offset. I understand that there may be 
> more than one Audi 323x30 rotor out there.
> 
> I took my rim off but could not find a part number.
> It's possible the number is covered in rust sscale, so
> if you might know where on the rotor it would be stamped
> that would be helpful as well.
> 
> I did find some stamp marks referring to min thickness and the fact 
> that it was made in Germany, but no other easily identifiable numbers. 
> Of course I can't find the receipt for the ones I have mounted either.
> 
> Options seem to be from either an A8/S8 of say around 2001 vintage or 
> an older s6+ rotor and supposedly they are different.
> 
> TIA,
> 
> Manny
> 
> 95.5 urS6 Avant _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


      __________________________________________________________________
Be smarter than spam. See how smart SpamGuard is at giving junk email the
boot with the All-new Yahoo! Mail.  Click on Options in Mail and switch to
New Mail today or register for free at http://mail.yahoo.ca
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com http://www.audifans.com/mailman/listinfo/s-car-list



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com