[s-cars] Dash toggle switch

[chris chambers]

Paul,

unsure what signal your current switch sends (SPDT, DPDT?)and I hadn't
heard of this option sounds like a great idea.

However you can use a foglight switch and then depending on what signal
needs to be sent you could use a relay in conjunction with the switch.

Make sense?

Chris


--- "P. Dooley" <weski at icubed.com> wrote:

> S-Heads,
> 
> I have the 034 RS2 ECU upgrade in my 95 S6.  This software has a
> normal 
> setting and a hyper setting (normal = 87-89 octane and peaks at 20PSI
> 
> and hyper is 91-93 and 27 PSI).  Currently I have a plain silver
> toggle 
> switch to go between the two settings (like I ever drive it "normal"
> but 
> when the better half drives the car or heaven forbid a wrench),   I'd
> 
> like to blend this toggle switch into the dash and use one of the
> blank 
> switch slots next to the front seat heater switch.  So, does anyone
> know 
> which factory switch could be pulled out of a donor car that would
> mimic 
> a toggle switch? 
> 
> I'm thinking maybe the two-way radio switch - 4A0-035-775.  Think
> this 
> would work?  Anyone have one they're not using?
> Probably either the front or rear fog light switches would work - 
> 4A0-941-535 or 4A0-941-563-C.  Having the amber or red illuminated 
> signal would be nice.
> Switch for roll blind would probably be a momentary switch, not a
> toggle 
> switch - 4A0-959-903.
> 
> TIA,
> 
> Paul Dooley
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
> 


Make April 15th just another day http://www.fairtax.org