[s-cars] Front Brake calipers not releasing......
Ian Duff
iduff at comcast.net
Tue Apr 21 10:50:38 PDT 2009
Silly, perhaps obvious question, but I gots to know: got the little
springy things that came with the pads installed correctly?
-Ian Duff.
On 21 Apr, 2009, at 13:43, Jim Fleischer wrote:
> Hey guys,
>
> Sorry for the constant questions....but....
>
> I've got everything back together as far as Front and Rear
> brakes.....new lines, new rotors and new pads.....everything is bled
> and I've got good brake pedal pressure....
>
> The front calipers are not releasing after pedal application.....in
> other words, they pressure the pads just fine, pedal feel is good,
> but then the pads just stay in contact with the rotor, with some
> pressure on them although the pedal is released.....this is
> happening on both front sides. Rears seem to be okay. Parking
> brake is working fine so far.
>
> Calipers are original, with 78K on them.
>
> The pistons retract easily when pressed, they just don't do it on
> their own. Things got really hot on a short test drive, like I was
> driving with the brake pedal depressed. I think I've lubed up
> everything as needed....guide pins move easily....could have missed
> something I guess. Any thoughts?
>
> Thanks!
>
> Best regards,
>
> Jim Fleischer
> '95 s6 avant
> '83 ur
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list