No subject

The only caveat I can think now to mention is that I pulled my cams from
another engine so sprockets werent removed.

No removable links im aware of.

Sprocket fit as original, and had the same timing reference as well.

Quite simple and stress free actually with much nicer power to look forward
to.

enjoy!
-brian



.



On Sat, Jul 24, 2010 at 3:03 PM, David Forgie <forgied at shaw.ca> wrote:

> While I am doing the timing belt (etc) on my 93 UrS, I am installing an RS2
> exhaust cam.
> I am not sure if the cam chain has a removable link or not (I think not).
>  The question is,
> will I be able to install the RS2 exhaust cam with the proper alignment if
> the cam chain
> does not come apart? The Bentley seems to be silent on this issue (AFAIK).
>
> I intend to mark the chain and the OE cam sprocket as to position of the
> chain on the
> sprocket and I know that I need to line up the "O" on both intake and
> exhaust cams at the
> top of the head (where they are right now). (I am not turning the RS2
> exhaust cam by a tooth,
> as per RS2 installation - that would require an RS2 cam position sensor
> shutter wheel).
>
> Thanks in advance.
>
> Dave F.
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>



-- 
http://208.53.138.125:8068/
 [blinders off&earplugs out]