[s-cars] S6 Rear Suspension Rebuild

[Jack Walker]

This is a daily driver, doubt I'll go to the degree of delrin or Aluminum
subframe mounts then! Are there any crossovers that will work from something
else?

I'm going to assume by AMD you mean the guys in the Seattle area?

Jack

-----Original Message-----
From: chris chambers [mailto:fastscirocco_2000 at yahoo.com] 
Sent: Tuesday, August 04, 2009 1:52 PM
To: Jack Walker; s-car-list at audifans.com
Subject: Re: [s-cars] S6 Rear Suspension Rebuild

Jack,

you can not get OEM or stock like aftermarket rear sub frame mounts.
Audi only sells them with the sub frame.

You can get delrin or aluminum ones from AMD.

HTH

Chris

 


----- Original Message ----
> From: Jack Walker <jack at walkerperformancegroup.com>
> To: s-car-list at audifans.com
> Sent: Tuesday, August 4, 2009 4:13:44 PM
> Subject: [s-cars] S6 Rear Suspension Rebuild
> 
> Looking for any advice on what most would replace on the rear suspension
on
> a 1995.5 S6A. 
> 
> Last summer I rebuilt the front. The rear is due;
> 
> 
> 
> I'm talking subframe removal, new sub frame mounts
> 
> Flush the differential, new fluid
> 
> All control arms with all new bushings.
> 
> Planning on using HD Bilstein (were used in the front)
> 
> Am in the process of getting a HAP RSB which I plan on installing at the
> same time
> 
> 
> 
> Has anyone done this and have a list of suggestions?
> 
> 
> 
> Jack
> 
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information