[s-cars] I have 'one' noisy lifter on a rebuilt AAN head.. question?

[airbil]

JP
Not clear if you do or dont have Bentley... but, it says (of  course)  
Do not interchange lifters when removing and reinstalling.  i.e. put  
them back in the same place.
Bring engine to op temp and run at 2500 rpm for two min.
Still noisy?
Rotate crankshaft clockwise till lobe is pointing up.
Press lifter down with wood or plastic wedge.
Free travel in excess of 0.1mm (0.004in.)  ... replace.
Or wait a bit.. and let Platt do it at the fest.
HTH
Bill~w/the Lobe Lo down~M