[s-cars] Clutch master,slave cylinder hose

[chris chambers]

George,

The line should be one piece with steel hard lines on either end and flexible line in the middle.

It sounded to me like you described removing the flexible line and discovering rubber hose not 
meant for hydraulic fluids. If this is the case than I think someone patched/cobbled/pretended 
to repair your hose.

Your options are to order a replacement OR follow Vittorio's lead and have a reputable shop
use the right line and repair yours.

HTH
Chris

 


----- Original Message ----
> From: George Verbryck <georgeverbryck at yahoo.com>
> To: s-car-list at audifans.com
> Sent: Wednesday, August 26, 2009 8:58:20 PM
> Subject: [s-cars] Clutch master,slave cylinder hose
> 
> Today I was making my way home and the clutch pedal went to the floor and stayed 
> there,Oh shit think I as I have read about putting in a clutch master. However 
> once I had the car home in the garage I took a look an the combination 
> hard-rubber line is leaking. I was able to take it out OK> So my question I have 
> is dealer or hydraulic shop or ? The thing says all over it not for brake use is 
> this hose something special i.e. not just brake hose? Is this a common failure? 
> Any BTDT would be helpful Best Regards, George
> 
> 
> 
>       
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information