[s-cars] Hose Rip

[chris chambers]

Bill,

I couldn't find anything that would work good enough when mine
failed in the middle of amishvilla PA.

here is a link to my Audiworld post on how I temporarily repaired
my hose using a rubber plumbing coupler, a pice of pipe and a couple
clamps.

It worked quite well

HTH
Chris
 


--- On Wed, 2/4/09, bill mahoney <airbil at gmail.com> wrote:

> From: bill mahoney <airbil at gmail.com>
> Subject: [s-cars] Hose Rip
> To: "Audi S Car List" <s-car-list at audifans.com>
> Date: Wednesday, February 4, 2009, 10:33 AM
> Folk's
> I have about a 1-2" tear in my maf to turbo hose at
> the turbo connection.
> Pending arrival of der new hose, is there some very heat
> resistant tape of
> silicon adhesive that I might find at the FLAP that I could
> use to nurse
> this for a coupla days?
> Should be easy, but I haven't been able to think of
> anything.
> TIA!
> Bill~sucking air~M
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list