[s-cars] Busted Clutch Actuation Rod
Bill M
airbil at gmail.com
Sun Feb 8 15:08:16 PST 2009
Aaron clutched~
"Can the broken clevis on the clutch pedal really be accessed w/o
removing the clutch and brake pivot assembly? Freds comment "access is
limited" is an understatement.
To those who have done this, is it worth it to remove the pivot
assembly?
(Being 6'4 isn't helpful in this instance)
At least its pushing 35deg here in my snowy Idaho driveway!"
Aaron,
It's been a number of years since I did this, so as best as I can
recall.. the clevis can be removed
without removing the whole assembly.
That said, it is an incredible S feat to do this upside down and
backwards on a cold snowy Idaho driveway.
IF you are lucky enough to have broken the threaded portion of the
threaded rod somewhere where you are left with some thread on both
sides of the break,
I would highly recommend trying to connect the two broken halves with
a "coupling nut"
http://www.mcmaster.com/#threaded-rod-connectors/=inpuv
I'd say this is just as good and possibly better than a new MC... and
way easier.
HTH
Bill~one time uber rafter of the middle fork of the Salmon River~M
More information about the S-CAR-List
mailing list