[s-cars] Brake sensor malfunction
Robert Myers
bob at chips-ur-s.com
Mon Feb 16 14:49:40 PST 2009
Chris,
I "fixed" mine by entering the instrument cluster and jumpering two
wires inside one of the electrical connectors where it attaches to
the IC. If you want specifics I'll hafta go back inside and tell you
which wires and which connector are involved. Of course such a fix
requires that the driver assume responsibility for checking the
brakes every now and then.
Bob
At 05:18 PM 2/16/2009, chris chambers wrote:
>Gents,
>
>My brake sensor on my S6 is screaming that I need new brakes, even though
>there are all new rotors/pads all the way around!
>
>The connector on the car side has been cleaned by my tech and even
>when bridging the connectors at the car it still screams for pads.
>
>Other than cutting back into the harness and permanetly disabling
>the sensor is there a known trouble area I can check?
>
>Thanks
>Chris
>
>
>
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date:
>02/16/09 06:55:00
More information about the S-CAR-List
mailing list