[s-cars] overriding brake pad sensors

[chris chambers]

Mike,

sounds to me like you cut the speed sensor wires instead of the pad sensor wires.
I recommend you get out your trusty soldering iron and reconnect the wires.
The speed sensors are at each wheel and measure the speed of each wheel
in order to sense when some are locked up and others are turning.

HTH
Chris

PS other more informed listers will not point out why I'm wrong!  :-)
Countdown to B-day - 71 days and counting




----- Original Message ----
> From: Mike Platt <mplatt911 at yahoo.com>
> To: s-car-list at audifans.com
> Sent: Thursday, July 30, 2009 10:37:37 PM
> Subject: [s-cars] overriding brake pad sensors
> 
> So....in an attempt to get the pad sensor light out in the dash I cut both 
> sensor connections under the hood and soldered them closed to complete the 
> circuit. Well that didn't get rid of light and now my "antilock off" light comes 
> on while I drive. Thoughts?
> Mike (old owner new problems) P
> 
> 
>       
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information