[s-cars] Re; Outside mirror glass GB

Tom Green trgreen at comcast.net
Sat Jun 20 16:49:55 PDT 2009


Hopefully, now that your package has been delivered, the question is  
OBE,
but, specifically, no, Bentley won't be much help.  Read the below  
while you
inspect the new mirrors.  You need to release the 8 clips on the  
circle without
breaking them or, worse, something on the gimbal ring.  If it won't  
easily come
off, go in the bottom access.  You may have to fold the mirror in to  
get the panel
off, but it will give you clear access to the clips.

My tracking shows all the US deliveries complete, with just some  
international
packages to go.

Tom

> Patrick Moores (pfm2316 at yahoo.com) asks:
>
> hey guys, looking forward to getting the mirrors, do you know if  
> there are any
> installation instructions available for removing and reinstalling? I  
> do own a set
> of Bentley manuals - do you think its in there?
> ?
> regards,
> Patrick

>>> The question marks added by unknown editor.  If this is
not plain enough, better have a pro do the job.

>>> Some have requested details on changing the glass.
>>> The new glass should give great insight to the
>>> process.? There are four sets of double fingers that
>>> clip onto the gimbal
>>> circle for the motor drive.???If gentle
>>> pressure on the inside and bottom edge of the glass won't
>>> release the fingers, the bottom access panel (unpainted)
>>> will give access to
>>> pry loose some of the fingers.???Once
>>> started, it should easily continue to come
>>> off.???Remove the heated glass wires before
>>> you pull too far.? Per Bentley, installation is the
>>> reverse of removal.? Don't pull or push too hard on
>>> the outer end of the large glass.? I have not seen a
>>> mirror housing that did not provide housing for
>>> spiders.? : > )
>>>
>>> Tom



More information about the S-CAR-List mailing list