[s-cars] 034; C4 tranny mounts & center support bearing.

[brian hoeft]

no pictures to provide guys, broke the 2 digi cams i have worth using, if
theres something more detailed you want to know about, the memory is pretty
fresh..

and no joshua i didnt touch the u-joint itself, there are retaining
circlips, but the joint being tight said leave be.       theres a 17mm bolt
that a traditional box end can turn off, then separating the halves as the
head is going to bottom out against the yoke is whats worked for me.   a
good vice and extra set of hands is quite helpful for that, otherwise, i did
it all myself.

-brian





On Wed, Oct 21, 2009 at 11:04 AM, brian hoeft <qweblog at gmail.com> wrote:

> Hi list, dropping a line to share my enjoyment of recently refurbished
> driveshaft.
>
> bought 034motorsports' street density trans mounts and driveshaft center
> support bearing.
>
> had some problems in the past with fitiment and other particulars regarding
> 034's products but gave another chance and am very pleased.
>
> the density of the mounts is definitely stiffer but not harsh at all and
> the center support bearing did fit as OE should resulting in my planned one
> day of downtime. .. thankfully also my CV ends only needed a re-pack of
> grease as the boots werent torn.. BTW if anyone knows how to buy just the
> driveshaft CV boots, please tell..
>
> happy to have a tight drivetrain again without clanking, brian
>
>
>
>
>
>
>
>
> --
> http://208.53.138.125:8068/
> [blinders off&earplugs out]
>



-- 
http://208.53.138.125:8068/
[blinders off&earplugs out]