[s-cars] Heater Core - Source for all metal version?

[Peter Schulz]

Peter:

Given how long the oem plastic/aluminum one lasted, your greater 
concern should be the quality of the replacement, be it 
plastic/aluminum,  or brass & copper.

I replaced the radiator in my wife's former 200q20v avant with an 
"all metal" radiator made by Nissens instead of the plastic/aluminum oem Behr.

I had to chase the threads on the Nissens radiator because they were 
filled with paint overspray, and the paint started peeling off the 
radiator within a week of installation.  Not to mention some of the 
brazing on the endtanks looked iffy.

I would try to replace either the radiator or heater core with oem or 
at least a name brand/quality one, if possible not made in China...

-HTH

-Peter

At 10:02 AM 9/5/2009 -0400, Peter Dowker wrote:
>Hi All.
>
>Very sorry to miss S-fest again this year, but the heap just ain't
>ready for road work. Recent events, including the heater core
>replacement project and the intermittent shut down, continue to plague
>me. I must pay greater homage to the Audi gods....
>
>Does anyone have a parts source for an all-metal version of the heater
>core on the urS4/6 C4 chassis. Impex is back ordered at the moment....
>
>Thanks in advance.
>
>Peter Dowker
>1993 S4 - interminable project
>_______________________________________________
>S-CAR-List mailing list
>http://audifans.com/mailman/listinfo/s-car-list
>http://www.audifans.com/kb/List_information

-Peter Schulz
Chelmsford Ma, USA
http://www.naaclub.org/

1995.5 S6 Avant Emerald/Ecru
1995.5 S6 Avant Silver/Platinum
1991 90Q 20v Q Red
1991 90Q 20v Indigo
1991 CQ silver  (eS2 recipient)