[s-cars] ABS Off Light Problem - VAG COM

[Manuel Sanchez]

Marky Mark,

No pestering experienced at all. Glad to hear from you and sorry I  
could not shed any light on the problem. Good luck to you and Brian.

Regards,

Fellow Marylander Manny



Message: 1
Date: Wed, 16 Sep 2009 20:50:34 -0400
From: "Mark Pollan" <mpollan1 at aol.com>
Subject: Re: [s-cars] ABS Off Light Problem - VAG COM
To: <s-car-list at audifans.com>
Message-ID: <c3c.617310ad.37e2e1e4 at aim.com>
Content-Type: text/plain;	charset="us-ascii"

Gents:

I met up with Brian this evening to pull codes and I could not read/ 
connect
to the ABS module.  I first ran Autoscan and some trivial codes came  
up but
no reading on ABS.  Going directly to the ABS module and no  
connection.  I
tried several times to no avail.  I have access to an old HEX COM  
with the
OBD II connector and the 2x2 adapter dongle.  I would have suspected the
dongle but connection was established with other controllers.

Thoughts?  Is it possible the controller itself is messed up?  I rang up
Mark Turczyn as I had already pestered Manny Sanchez and Mark though  
maybe
the no read condition is due to a bad connection to the ABS controller
itself.  Seem plausible?  Where might the controller be located as I  
gifted
my Bentley to Mark when I sold the S6.

Any and all insights are greatly appreciated.  Brian is a hell of a  
nice guy
and I'd love to see this to closure but your help is definitely needed.

Thanks in advance,

Mark