[s-cars] S6 no start fun

[qshipq at aol.com]

 I don't believe that's a true statement regarding the AAN Motronic.? The AAN Motronic can recognize 30 faults.? I believe you are technically trying to speak to DTC Static (your 'permanent' reference I think) vs a Temporary Fault.? A Temporary Fault differs in that if a fault is recognized,? if within the next 50 engine starts, the fault no longer appears, it is automatically erased.

To confirm temp fault code is indeed available in 'blink', turn the engine to 'on' (not running), you will? blink 2111 and/or 2112 (rpm and TDC respectively) and/or occasionally 2234 (Supply voltage low).? These are considered a Temporary DTC, and will automatically erase.? Both available in Blink mode.

AFAIK, all codes are available to the AAN Motronic via blink code.? The 4 main output tests are also available via the jump wire technique.

Scott J


 

-----Original Message-----
From: Brett Dikeman <brett.dikeman at gmail.com>
To: Steve Marinello <smarinello at entouch.net>
Cc: Tom Green <trgreen at comcast.net>; Scarlist <s-car-list at audifans.com>
Sent: Sun, Sep 20, 2009 7:14 pm
Subject: Re: [s-cars] S6 no start fun










On Sun, Sep 20, 2009 at 6:15 PM, Steve Marinello <smarinello at entouch.net> wrote:
> Well, it's Sunday, but after washing the A4q in the heat and dealing with
> another crisis in Peru, I find myself not in the mood to try to blink codes
> just yet.

"Blinking codes" usually only retrieves permanent fault codes, not the
intermittent fault codes.  Only VAG-COM does that.

That might be why some of you "don't get" codes...

-B
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information