[s-cars] replacing cooling hoses

[Tom Green]

No.

Be sure to replace the o-rings for the adapter and sensor in the "T",  
but that
should be all the sealing required.

Tom


> -----Original Message-----
> Date: Thu, 24 Sep 2009 10:05:28 -0400
> From: David Cahill <djcahill at gmail.com>
> Subject: [s-cars] replacing cooling hoses
> To: s-car-list at audifans.com
> Message-ID:
> 	<d559bf560909240705s18e56ccegae21a65091468ceb at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> I am in the throes of cooling hose replacement on the UrS4. I'm  
> getting
> ready to do the flange at the back of the block, plastic T-fitting  
> and all
> the surrounding rubber. Here's the question: should I be using a  
> gasket
> sealant (non-hardening) on any of these joints - for instance, where  
> the
> flange meets the head, or whether any of the rubber hoses fit on the  
> plastic
> pipe ends?
>
> Thanks,
> Dave