[s-cars] '94 UrS4 rear spring replacement

[Duncan Thomson]

Looks like a useful tool, but not 100% sure it will fit around swaybars
etc in the back of the UrS4.
Ended up getting a standard spring compressor on one side, and wrapped
opposite side with wire.
A bit dodgy, but figured the spring compressor would limit any damage.

Got one side done, will leave 2nd side for tomorrow.
Thanks for the feedback!

Duncan


-- 
On 15/04/2010 8:18 p.m., Theodore Chen wrote:
> There are different styles of spring compressors out there.  I got this one:
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=43753
> I haven't tried it on the UrS4 yet, though.
>
> Other methods I've seen involve compressing the spring off the car, then using hose clamps, cable, nylon rope, etc. to keep the spring compressed.  After installing the assembly, cut the rope, cable, etc.  Use this method at your own risk.
>
>
> ----- Original Message ----
> From: Duncan Thomson <thomson.duncan at gmail.com>
> To: S-CAR list <s-car-list at audifans.com>
> Sent: Thu, April 15, 2010 12:54:34 AM
> Subject: [s-cars] '94 UrS4 rear spring replacement
>
> Anyone have any advice, or a written up procedure on replacement of the
> rear springs?
> I managed to get the assembly out, and mostly back in, but now can't get
> the bottom bolt in.
> I need to compress the strut, but I am really having trouble fitting the
> spring compressors in there.
>
> I have managed so far without removing anything other than the wheel and
> the strut itself. Is there something else I should remove to find more
> space?
>
> Thanks for any help!
> Duncan
>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>
>