[s-cars] Big Red how to...

[Taka Mizutani]

Big channel lock pliers-

Squeeze the two wire pieces together, remove the spring clip and the pads
come right out from the top. It helps if you have a pad spreader to retract
the pistons.

On these it's a piece of cake.

I use a small pry bar to separate the pads.



On Thu, Aug 19, 2010 at 7:39 AM, LL - NY <larrycleung at gmail.com> wrote:

> Can anyone give a quick how to change pads on a set of Big Reds (suggested
> tools, too)?  I can't figure out the wire retainers, and although I could
> take the calipers off to get at the pads, I'd rather not.  Also, help on
> how
> to free the pads from the pistons would be helpful (I know that I had
> installed the anti-squeal buttons when I did these, but it's been oh, about
> 6 years).
>
> TIA,
>
> LL - NY...short term memory gone,...long term memory gone...uh, what's
> left?
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>