[s-cars] Serpentine belt tensioner for URS

[Tom Green]

Try here:

http://forums.quattroworld.com/s4s6/msgs/22625.phtml

I bought a NTN 6203LLBC3/L627 bearing from BDI.  There is probably
a store local to you.  You have to split the pulley and rivet it back  
together
in order to install a new bearing.  Fred explains all that in the  
repair link.

Tom
> -----Original Message-----
> Date: Sun, 28 Feb 2010 09:04:11 EST
> From: ELLIEOLSEN at aol.com
> Subject: [s-cars] Serpantine Tensioner for a URS, who has some?
> To: s-car-list at audifans.com
> Message-ID: <719e7.388e7ea2.38bbd1db at aol.com>
> Content-Type: text/plain; charset="US-ASCII"
>
> Gents after 2 years of being a stranded project my S6 is about to   
> be back
> to is old self with a few extra go faster  parts....HOWEVER, I have  
> looked
> high and low and have found nothing in the  way of a serpantine   
> tensioner
> that will fit, do any of you have one  of these bad boys or just the  
> bearings
> for one?
>
> Cheers,
>
> Shawn Olsen
> Austin TX