[s-cars] it won't stop!

[Wylie Bean]

If nothing else, if it does require a tranny-drop to fix, you might consider doing the master, slave and rubber/metal line at the same time, unless they're somewhat new.
Wylie Bean
TheRingmeister at triad.rr.com
90 cq
91 90q20v
92 UrS4
08 Q7 3.6
Sent on the Sprint® Now Network from my BlackBerry®

-----Original Message-----
From: Mike Fitton <rfitton at vt.edu>
Sender: s-car-list-bounces at audifans.com
Date: Wed, 21 Jul 2010 21:10:32 
To: Fred Munro<munrof at sympatico.ca>
Cc: <s-car-list at audifans.com>
Subject: Re: [s-cars] it won't stop!

Awww, two votes for bearing/fingers.  I see the slippery slope looming 
ahead...

-Cheers!
Mike


On 7/21/2010 8:45 PM, Fred Munro wrote:
> Mike;
>
> I would think "thrumming" in the pedal is more likely caused by a bad
> throw-out bearing or broken fingers on the pressure plate. Since the clutch
> won't release, I'd go with the broken fingers. Unfortunately that is a more
> difficult fix than the clutch master.
>
> HTH
>
> Fred Munro
> '97 S6
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Mike Fitton
> Sent: July 21, 2010 7:30 PM
> To: s-car-list at audifans.com
> Subject: [s-cars] it won't stop!
>
> My clutch won't unclutchify.  Pedal goes down all the way, returns all
> the way.  Effort is a little lighter than usual.  Won't release the
> clutch and I can't get into gear from a stop.  Thrumming in the pedal.
> No thrumming or any other abnormalities with the brakes.  That's
> consistent with a clutch master, right?  Just want to double-check
> before I order one.
>
>    
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information