[s-cars] Cam chain question

[David Forgie]

While I am doing the timing belt (etc) on my 93 UrS, I am installing an RS2 exhaust cam.
I am not sure if the cam chain has a removable link or not (I think not).  The question is,
will I be able to install the RS2 exhaust cam with the proper alignment if the cam chain
does not come apart? The Bentley seems to be silent on this issue (AFAIK). 

I intend to mark the chain and the OE cam sprocket as to position of the chain on the
sprocket and I know that I need to line up the "O" on both intake and exhaust cams at the 
top of the head (where they are right now). (I am not turning the RS2 exhaust cam by a tooth, 
as per RS2 installation - that would require an RS2 cam position sensor shutter wheel).

Thanks in advance.

Dave F.