[s-cars] for the Annoyance Files

Robert Myers bob at chips-ur-s.com
Mon Jun 14 08:44:11 PDT 2010


*This message was transferred with a trial version of CommuniGate(r) Pro*


Y'all,

The final solution for the pad wear warning annoyance:


(On my 1995.5 urS6) With a little help from Dave 
Forgie I found a brown wire with a green stripe 
leaving (from the Pin 6 position), going to the 
T26 green instrument cluster connector. Goes into 
Pin 6 of the green 26 pin connector at the rear 
of the instrument cluster and then into the instrument cluster printed circuit.
Inside the green connector install a jumper 
between the brown ground line and the brown/green 
signal line from the brake circuit. This will 
eliminate the brake wear test circuit completely 
and turn off the annoying lights. This also means 
that you will have to check the pads every now 
and then to take over the wear sensing duties yourself.

Bob

At 11:39 AM 6/14/2010, Wylie Bean wrote:
>*This message was transferred with a trial version of CommuniGate(r) Pro*
>You've inadvertently set the speed warning by 
>pressing in on one of the buttons on the 
>cluster, no doubt in an attempt to clear the brake pad warning light.
>Should be in the manual somewhere.  What's 
>really annoying is when you set it coasting 
>along in traffic and it goes off every time you hit 10mph or somesuch.
>I have the brake pad warning too, even though I 
>cut and spliced the correct ends to new pads.  I 
>guess I should have just cut and crimped the wires together.
>Not sure if soldering is a good idea in the case of the brake sensors.
>Wylie Bean
>TheRingmeister at triad.rr.com
>90 cq
>91 90q20v
>92 UrS4
>08 Q7 3.6
>Sent on the Sprint® Now Network from my BlackBerry®
>
>-----Original Message-----
>From: "HEALY, WILLIAM L (ATTOPS)" <wh3518 at att.com>
>Date: Mon, 14 Jun 2010 11:17:43
>To: <s-car-list at audifans.com>
>Subject: [s-cars] for the Annoyance Files
>
>Hey guys,
>
>I've got the brake pad warning gremlins taking up residence in my IC.
>I've already cut and soldered the wires, thought I was home free for the
>last year, now they're back.  The autocheck system is toggling between
>the brake pad warning and one that is a circle with "MPH" in it. What
>the hell is that?  Did I go too fast and the car didn't like it?
>
>Couldn't find that in the owner's manual.
>
>Thanks for the feedback....
>
>Bill
>
>
>_______________________________________________
>S-CAR-List mailing list
>http://audifans.com/mailman/listinfo/s-car-list
>http://www.audifans.com/kb/List_information
>_______________________________________________
>S-CAR-List mailing list
>http://audifans.com/mailman/listinfo/s-car-list
>http://www.audifans.com/kb/List_information



More information about the S-CAR-List mailing list