[s-cars] replacement heater valve source ?

[Wayne Dohnal]

And it's likely that the plastic fitting on the back of the engine is ready 
to go, too.  May as well do that while you've got the coolant hose opened 
up.  I got all the parts from Scott Mockry in 2006.  Price then was $11 for 
the tee including the clip, and $8 for the engine fitting including the 
o-ring.  I didn't need the sensor.  I was going to replace only the tee and 
Scott talked me into the engine fitting.  The old one crumbled on the way 
out.

Wayne Dohnal
1994 S4

>
> yeah and you can pretty much guarantee the P-O-S plastic T housing is 
> going
> to break 2 seconds after you touch it, as they tend to deteriorate and
> crumble with age, so order that while you're at it.
>
> Essentially you want to get: the T, the sensor, o-ring and the retaining
> clip.
>
> Parts pretty cheap thankfully, should not be dealer only, AutohausAZ has
> everything but the plastic T.