[s-cars] Heater not working

[J R]

Heater is back!  I pulled drip trays, cowls and wiper assembly in front of
the windshield.  The temperature flap was not moving at all while changing
the temp setting on the climate control head.  I pulled the servo and
drivers side linkage off and the flap turned fine by hand.  I opened up the
servo and cleaned up the electric motor.  I reinstalled the servo, held my
breath and tried changing the temp on the climate control head...  IT'S
ALIVE!  Working like a champ again, and just in time for winter.

Thanks to everyone who posted to this thread!

JR


On Mon, Oct 25, 2010 at 9:15 AM, Steve Mills <s.b.mills at gmail.com> wrote:

> Tony Curran said "The K-Y connectors for VAG-COM are behind the HVAC head
>  -
> I have been told
> this but never used them myself." I was trying to correct that.
>
> On Mon, Oct 25, 2010 at 9:11 AM, John Cunningham <jc at j2c3.com> wrote:
>
> >
> >
> > > Actually, the 2x2 connector is in the under-hood relay/fuse panel on
> the
> > driver's side.
> >
> > Isn't that what I said?
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>