[s-cars] valve cover
Ian Duff
iduff at comcast.net
Thu Nov 4 06:08:10 PDT 2010
And don't forget the ones in the middle, between the coilpacks! RTV will help with the halfround bung at the back, too.
-Ian.
On 04 Nov, 2010, at 08:53, David Kase wrote:
> Hi Martin,
>
> I am not sure of the size (guessing 5 or 6mm) but it is probably worth your
> while to just buy a 3/8" drive set of hex drivers. The Craftsman ones are
> fine and you will get a better deal buying a set.
> Since it seems you may be working on your car anyway, start collecting the
> tools you will need!
>
> Cheers,
> Dave Kase
>
> On Thu, Nov 4, 2010 at 8:49 AM, Martin Baggenstos <
> martin.baggenstos at gmail.com> wrote:
>
>> Hello Everyone,
>>
>> I am getting ready to replace my valve cover gasket and hoping someone
>> knows the right mm hex size instrument needed for the bolts holding it
>> down. Also does anyone recommended some gasket sealant along with the
>> new gasket. Thanks.
>>
>> Martin
>> _______________________________________________
>> S-CAR-List mailing list
>> http://audifans.com/mailman/listinfo/s-car-list
>> http://www.audifans.com/kb/List_information
>>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
More information about the S-CAR-List
mailing list