[s-cars] 3B engine replacement options for "Deerslayer" Frankenmotor

[NIck Miller]

Hey been, you should probably drop this by the guys at motorgeek.  I don't
believe the domed pistons from the 10v block will work out with the 3b head,
I haven't done any looking for a long while but I believe that the deck
height and the way the combustion chambers are done you need very different
pistons between a 20v block (3b or AAN) and a 10v.

You may check out a thread "20v on the cheap" at motorgeek, some guy figured
out the needed parts to use an MC block and 7a head, then turbo'd it.  using
pistons from something else as well.

Either way, can't you just measure the distance from the deck to the top of
one of the pistons, and then figure out if that will work with the head?
Such as you have a blown 3b, so if the distance from the deck to the piston
is similar, then it should be within the realm of possiblity, no?