[s-cars] Htr Core Update 1

[bill mahoney]

Boring stuff, but I've set this week as heater core week, which has really
turned into more of an hvac, and dash/center console refurbishment week.
Could be a reality series for nutballz.
Looks like a homeland security violation in the making.
Post wash and GI treatment, putting the two halves back together, I had to
tape some wires to the 5 flap shafts in order to align them with the holes
on the other half section:
http://www.flickr.com/photos/airbil/4988587051/sizes/z/in/photostream/  Was
still a challenge.
All put back together.  A marvel of plastic engineering:
http://farm5.static.flickr.com/4153/4989189602_a54f1352aa_z.jpg
It took me 2 hours to clean, lube and reassemble but no screws left over.  I
spent too much time thinking, "wtf is this and where does it go?"
Taking a lot of pre disassembly pics for reference "would" have saved some
time.
I prolly should test the blower motor, but hey, it's Meyle, made in China.
Tonight I hope to at least get it back into position and see if it works,
leaving all the dash center console for weds. / thurs.
I am thinking to move the boost gauge up to where some switch slugs are and
the V1 remote somewhere else too.  Dunno where though.
Stay tuned.
Bill~w/only fuel lines (and other stuff) to fix after this~M