[s-cars] Borescope'ing the oil pick-up
djdawson2 at aol.com
djdawson2 at aol.com
Wed Sep 15 21:27:36 PDT 2010
I never said anything about removing your control arms...
Seriously, you can get the oil pan out by just dropping the front of the subframe... no need to touch the control arm points. BTDT...
-----Original Message-----
From: brian hoeft <qweblog at gmail.com>
To: djdawson2 at aol.com
Cc: fastscirocco_2000 at yahoo.com; s-car-list at audifans.com
Sent: Wed, Sep 15, 2010 8:41 pm
Subject: Re: [s-cars] Borescope'ing the oil pick-up
I know, but I just replaced the control arms and im a hardware freak. "Always replace" may not mean always, as I remember you speaking to before, but my policy is to replace them every other time and they've all been re-torqued once..
-Brian
On Wed, Sep 15, 2010 at 10:32 PM, <djdawson2 at aol.com> wrote:
If you've got that sort of concern, I'd just drop the oil pan... it isn't that rough.
-----Original Message-----
From: chris chambers <fastscirocco_2000 at yahoo.com>
To: brian hoeft <qweblog at gmail.com>; liSt <s-car-list at audifans.com>
Sent: Wed, Sep 15, 2010 8:07 pm
Subject: Re: [s-cars] Borescope'ing the oil pick-up
Brian,
17-3 of the AAN engine manual shows the pick up in illustration 17-303, looks to
be in the front to me.
Here is a link where you can download the manual in pdf format.
http://s2-audi.co.uk/workshop/aan/aan.pdf
HTH
Chris
________________________________
From: brian hoeft <qweblog at gmail.com>
To: liSt <s-car-list at audifans.com>
Sent: Wed, September 15, 2010 9:58:13 PM
Subject: [s-cars] Borescope'ing the oil pick-up
Hi list,
I am concerned that I may have a contaminated engine oil pick-up screen.
Wondering if anyone has had any success using a borescope in the oil pan.
I forget, but ithought the AAN pick-up is in the front of the pan, but
forget if the baffles, however minimal, or dimensions make using a borescope
for this task even possible, going in through the drain plug hole.
A colleague of mine has a snap-on borescope with fancy lighting effects, but
if it cant even contort into place, whats the point.
Just typing to know if theres any BTDT for this scenario.
thanks, Brian
--
http://208.53.138.125:8068/
[blinders off&earplugs out]
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information
--
http://208.53.138.125:8068/
[blinders off&earplugs out]
More information about the S-CAR-List
mailing list