[s-cars] Strut Mounts 200tq20v
HEALY, WILLIAM L (ATTOPS)
wh3518 at att.com
Mon Sep 20 06:06:49 PDT 2010
Are these cupped washers also used on the 93-95 C4 S4s? I didn't have
them on my stock suspension, when I removed it, nor are they listed on
the Official Audi illustration.
http://forums.quattroworld.com/s4s6/msgs/24392.phtml
Thanks!
Bill Healy
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Mike Sylvester
Sent: Friday, September 17, 2010 5:25 PM
To: Mike Palatas
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Strut Mounts 200tq20v
Sounds like you forgot to put the cupped washers between the strut and
the underside of the mount.
Mike
www.urq20v.com
> -------- Original Message --------
> Subject: [s-cars] Strut Mounts 200tq20v
> From: Mike Palatas <mpalat at gmail.com>
> Date: Fri, September 17, 2010 1:50 pm
> To: s-car-list at audifans.com
>
>
> Hey guys, I have a question. Last year I replaced my struts from the
> factory pieces of crap to the Bilstein Sport Heavy Duty's. Within the
past
> month, however, both of the brand new strut mounts that I purchased
along
> with the upgrade (FEQ or Corteco) have failed. While replacing them,
I
> noticed something. The Bilstein's actually protrude quite
significantly
> from the housing (see attached). I had to jack the car up to fit the
mount
> on, so no big deal, but I'm wondering if that huge distance could be
the
> cause of the failures...? Extra pressure exerted and all that...?
>
> Thanks,
>
> Nick P. (Under Mike P.'s email since the s-cars-list doesn't like my
email
> address...)<hr>_______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information
More information about the S-CAR-List
mailing list