[s-cars] BBK parts accumulating
mtgadbois at aol.com
mtgadbois at aol.com
Mon Sep 27 18:37:07 PDT 2010
FWIW, I'm using Boxster S brakes with 314x30 rotors with 16" Fuchs and Avus
wheels, all with no problems. I may have an advantage as my brackets were
custom-made but all that was done was to center the rotor within in caliper
so any properly designed bracket would do the same.
Good luck,
Mark near Chicago
Priors:
I was fixated on 323mm rotors from the A8L and the 322mm rotors that Porsche
uses for 993tt brakes (Big Reds). I forgot about the 314x30 setup- that
would be why you can run 16" wheels- that would move the caliper inward by
3mm, I guess that's enough, especially if that hat offset is such that you
can bring the brakes inboard without hitting the strut.
There is no 320mm option- I had a quasi-custom setup- BIRA S2 UFO.
Taka
More information about the S-CAR-List
mailing list