[s-cars] S-CAR-List Digest, Vol 90, Issue 7

[Greg Johnson]

Look at the BIRA.ORG website under member's ride.  Check out my urS4 and
you'll see a pic of a Porsche Turbo caliper over a Porsche GT2/3 rotor, all
under a 16 inch Audi urS4 wheel.  It's all about how fit you the combination
in an the X - Y axis and what wheel you choose!

Greg J


> Message: 4
> Date: Thu, 7 Apr 2011 13:18:39 -0400
> From: "Cody Forbes" <cody at 5000tq.com>
> To: "Big Brake" <bigbrakeparts at gmail.com>
> Cc: quattro at audifans.com, s-car-list at audifans.com
> Subject: Re: [s-cars] Boxster vs. bigger brakes
> Message-ID: <1E7FFB6DFB39487697124DF948AA988E at codylaptop>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>        reply-type=original
>
> Ok, why did you choose this caliper over all of the other options out
> there?
>
> -Cody
>
> --------------------------------------------------
> From: "Big Brake" <bigbrakeparts at gmail.com>
> Sent: Thursday, April 07, 2011 9:51 AM
> To: "Cody Forbes" <cody at 5000tq.com>
> Cc: <s-car-list at audifans.com>; <quattro at audifans.com>
> Subject: Re: Boxster vs. bigger brakes
>
> > It is Brembo, made in Italy.
> >
> > On Wed, Apr 6, 2011 at 10:27 PM, Cody Forbes <cody at 5000tq.com> wrote:
> >> Looks cool. Why did you go that route instead of Bembos?
> >>
> >> -Cody (mobile)
> >>
> >> On Apr 6, 2011, at 10:05 PM, Big Brake <bigbrakeparts at gmail.com> wrote:
> >>
> >>> On Sat, Apr 2, 2011 at 3:44 PM, Cody Forbes <cody at 5000tq.com> wrote:
> >>>> Everything exists when you have a mill and a lathe ;-).
> >>>>
> >>>
> >>> Then I would highly recommend doing what I did. Can share my drawings
> >>> if you want. However fitting under 16 inch would be a big challenge.
> >>>
> >>> https://picasaweb.google.com/bigbrakeparts/UrS4CTSVCaliper
> >>
> >
>