[s-cars] Heater core?'s

Ian Duff ian at inside-overlap.com
Fri Aug 12 11:54:28 PDT 2011


Plastic fitting at the back of the block is almost certainly on its last legs. You might also want to look at the fittings in the plenum above the heater core, as well as the hoses to and from the after-run pump on the driver's side of the block. HTH. 

-Ian Duff.

On 12 Aug, 2011, at 12:48, ron kirkham wrote:

> So I need to start aquiring parts to replace the currently bypassed heater
> core in my '93 S4.  What is the recommended core to buy?  My local parts guy
> can get me a Bosch at a suprisingly affordable price, but is this the way to
> go?
> 
> I'll also be replacing the hoses from block to core as I beleive these
> are originals.  What else should I replace "while I'm in there"?  The blower
> motor is about 18mos. old, so I'm good there.
> 
> 47 degrees this AM makes me think the time is here for me to tear into this
> lovely job.  Joy!
> 
> Thanks,
> 
> Ron
> 93 S4 with no heat.
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
> 



More information about the S-CAR-List mailing list