[s-cars] Suspension and Alignment ?'s

Dace Voit dacevoit at yahoo.com
Tue Dec 27 12:13:01 PST 2011


Pull the plastic cap and check the strut bearings to see if the rubber is still in good shape. Also you can look at the position of the bearing in relation to the other side to see if it's pretty far put of whack. Those are easy to replace and go bad in the range where your car is now. Mine were replaced at 127k also.

Also, the lower control arms or just the bushings could be wearing out and letting the wheel slip outward a bit.

Doing all of the front suspension stuff is not too hard, although getting the control arm and sway bar into the bottom of the strut tower is a well documented PIA. 

Good luck!


More information about the S-CAR-List mailing list