[s-cars] Clutch slave dilemma

[Wylie Bean]

Slave was bad in my car Bill. I changed the master due to a broken shaft, and still had no clutch and could not get it to bleed.  I suspect it was seized or something.  Anyhoo, changed the slave and bled it, and all was/is well.

Wylie Bean
TheRingmeister at triad.rr.com
90 cq
91 90q20v
92 UrS4
08 Q7 3.6
via BlackBerry®

-----Original Message-----
From: airbil <airbil at gmail.com>
Sender: s-car-list-bounces at audifans.com
Date: Sun, 13 Feb 2011 17:33:29 
To: <s-car-list at audifans.com>
Cc: <mplatt911 at yahoo.com>
Subject: [s-cars]  Clutch slave dilemma

MP
I assume you recall the threaded shaft on the MC that breaks as I  
think you did this repair once.
Seems more likely than fluid loss.  And I have never heard of a slave  
going bad (post 1860 something.)
I further assume that with it in gear and turning the starter, the car  
does not move?
If it is fluid from the slave, maybe just a loose connection.
Also, I "think" Tom Green, you live down that way, dontcha?
Bil~as if I could teach platt how to fix something~M
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information