[s-cars] Left Front Brake Hose/Line

[J R]

Anyone know of such a shop in the Twin Cities area that builds brake lines
like the piece I need?  Did your pre-formed piece have the screw in male
ends that attach to the brake hose and caliper?  I need the short piece of
bent hardline with the flares and the male screw in ends on each end.

Thanks,

JR


On Tue, Jan 11, 2011 at 7:45 PM, Kent McLean <kentmclean at comcast.net> wrote:

> Steve Mills wrote:
> > The fittings are standard (10mm x 1 IIRC) male, with bubble flares. Any
> > reasonably competent import shop should be able to make one in about 5
> > minutes. I made up a set to act as adapters to go between my Big Reds and
> > stock S6 factory lines.
> >
> > On Tue, Jan 11, 2011 at 8:24 PM, J R<audiurs4 at gmail.com>  wrote:
> >
> >> Anyone know where I can get that short few inch long bent hard brake
> line
> >> with the two flare ends and nuts on it that runs between the flexible
> brake
> >> hose and the caliper itself?
>
> You might also find a short length pre-formed at your local shop-supplier
> parts house. I got a 1-ft(?) length that I gently added a 1-inch loop to
> to make it fit on my old '94 100S Wagon. No flaring required.
>
> --
> Kent McLean
> 1999 A4 Avant, V6 Tiptronic
> 1990 200 Avant mit V8 conversion
> gone: too many to count, including my first, "Bad Puppy"
>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>